Special oxygen flame and explosion prevention design Material strictly avoids copper, carbon steel and other materials that are easy to react with oxygen. All parts' surfaces have been degreased, passivated and cleaned (in accordance with GB 16912 Technical Specification for Safety of Oxygen and Related Gases Produced by Deep Freezing Method) to eliminate the risk of combustion and explosion caused by impurities, and are suitable for pure oxygen and high-purity oxygen pipelines.
The one-way seal is reliable and adopts the lifting or swing structure. The valve clack is automatically opened by the medium Pressure. When the medium flows back, it is closed by its own weight+spring assistance. The soft seal is closely attached, with a leakage rate of ≤ 1 × 10 ⁻⁶⁶⁶⁶⁶⁶⁶⁶⁶ Pa ・ m ³/s, effectively preventing the abnormal system Pressure or equipment damage caused by oxygen reverse flow.
The low resistance clean flow channel design is streamlined, with no dead corners or liquid accumulation chambers, reducing oxygen flow resistance and impurity deposition; After assembly, all components need to undergo helium leak detection and cleanliness testing to avoid particle and grease contamination of oxygen, and are suitable for scenarios with high oxygen purity requirements such as medical, electronic, metallurgical, etc.
Some models with strong safety and adaptability are equipped with a slow closing device to avoid water hammer impact when high-pressure oxygen flows back; The flange connection surface adopts concave convex surface or mortise and tenon groove surface to enhance the sealing reliability; Widely used in scenarios such as oxygen generator exports, oxygen storage tanks, medical oxygen pipelines, and oxygen spray gun pipelines in steel plants.