
Size
Pressure
Material
Manufacturing Standards
DN15~DN800
PN16~PN40
Stainless Steel, Carbon Steel, Copper Alloy
GB, JB, HG, JIS, ASME, DIN, API
1. The oxygen stop valve is cast from silicon brass or stainless steel, with excellent Material, high mechanical strength, wear resistance, good safety and other advantages. Used for oxygen pipelines, it has the best explosion-proof and flame-retardant performance, eliminating the unsafe factors of oxygen pipelines.
Eliminating unsafe factors in oxygen pipelines.
2. The sealing surface is made of stainless steel or hard alloy overlay, which is not easy to wear and has good sealing performance. There is no relative sliding between the valve disc and the valve body sealing surface during opening and closing, and the wear is not severe. The sealing performance is good and the service life is long.
Not severely worn, good sealing performance, and long service life.
3. For valves with PN ≤ 4.0MPa and DN < 200, a single disc structure is used, where the medium flows from the lower part of the valve disc into the upper part (i.e. low inlet and high outlet). For valves with DN > 250, a double disc structure is used, where the medium flows from the upper part of the valve disc into the lower part (i.e. high inlet and high outlet). The valve adopts a double disc structure.
DN>250 valves adopt a double valve structure. The medium enters from the top of the valve to the bottom (i.e., high in and low out), which meets the needs of the bypass valve structure on the one hand, and greatly reduces the closing force of the valve due to the effect of the medium Pressure. Nominal Pressure
For nominal Pressure PN ≥ 6.3MPa, DN250~500 adopts external bypass valve structure. The purpose is to reduce the pressure difference before and after the valve, avoid high flow, high erosion, and prevent high temperature, thereby ensuring the safe operation of the oxygen pipeline network.
The purpose is to reduce the pressure difference before and after the valve, avoid high flow, flushing, and high temperature, ensure the safe operation of the oxygen pipeline network, and reduce operating torque.
4. The bracket part adopts a fully enclosed structure, and the protective cover plate on the bracket can be opened when compressing the packing, which plays a role in preventing oil and dust. And there is a clear oil-free mark.
5. The upper part of the valve stem is equipped with a dust-proof device. All valve components that come into contact with oxygen undergo strict degreasing and oil prohibition treatment before assembly. The packing and gasket are made of polytetrafluoroethylene material, ensuring safe and reliable sealing.
The packing and gasket are both made of polytetrafluoroethylene, ensuring safe and reliable sealing during use.
6. The valve is equipped with an electrostatic conduction safety device to prevent sparks from being generated due to static electricity. There is a grounding screw on the valve body flange, which directly leads out the static electricity of the valve through a wire to ensure the safety of valve use.
Online consultation